Tail Light

Features: 
This LED strip is really cool as an extra brake light and turn signal light. Great for night driving, the spoilers for car spoiler is easily noticeable at night.
This LED brake light strip is suitable for trucks, pickups, SUVs, vans-, trailers, cargo and other cars.
The adhesive of the LED roof spoiler light has strong adhesion and it really holds well in place, especially in hot weather and through carwashes.Torn off without trace after pasting.
Flexible and durable, high flex weather resistant material. Bend, twist, and curve around any surface. Water resistant, high-density waterproof material ensures your led spoiler is protected from wind/rain/snow and the elements.
Easy installation, few minute setup and quick wiring. Easy to adjust the position and cut the perfect size to match with your car.

Specification:
Material: ABS+Circuit Board
Size:As Picture Shown
Style: Red Light 2 Mode/Red Light Multi-mode

Package Includes: 1x Brake Light

note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.

• 🌎SHIPPING WORLDWIDE
• 💯Secure Payments Via PayPal® 
• ⭐Returns>> 100% Money Back Guarantee
• 🎉 Order Over $49.99 Free Shipping🎉

🚗🚙Fixes Car Lens Cracks In Minutes!🚙🚗

Repairs Tail Lights, Turn Signals, Markers and Clear Lenses
Multi-Pack comes with all 3 colors, Red, Amber and Clear!
Easy to use and takes minutes to repair!
Just cut and paste!
Saves you $$ and time!

Product Description
New all 3 colors in one affordable Multi-Pack Lens Repair Kit! QUICK LENS will fix a typical broken taillight lens in place, without removing the housing. The repair panel has a pre-formed grid pattern that closely matches the color and reflective qualities of the lens. Quick Lens mounts quickly and easily on flat or curved surfaces with a special adhesive gasket forming a weather proof seal. INSTRUCTIONS QUICK LENS REPAIR 1. Remove all loose and broken pieces around damaged area. Clean lens around area thoroughly with dry cloth or paper towel. 2. Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. if size selected needs to be smaller, trim along the inner grid lines. 3. Peel backing from panel and center over area to be repaired. Press the panel to the lens and run your fingers around the edges to insure a good bond.
Package Included:
1 Set Auto Lens Tail Light Repair Kit

Features: 100% brand new and high quality
The 360-degree full luminous design makes the light brighter and more uniform. Light up immediately. No delays.
The high-quality heat sink can ensure the performance and stable light emission of the LED.
Car lights can be used for door lights, reading lights, tail box lights, interior lights, license plate lights, and roof lights.
Designed of high quality LEDs, super bright, low power consumption. Perfect choice if you want to upgrade your bulbs to LED type. Upgrade generation, no flashing, no residual light, high-quality heat dissipation base plate, uniform heat dissipation, stable performance.
Using three 1.5W power, 7020 lamp beads, full brightness. The arc-shaped insertion design prevents the shrapnel of the lamp holder from touching the resistor.

Specification: Voltage: 12V
Current: 0.08A
Power: 1W
Material:ABS
Size:As Picture Shown

Package Includes: 10x LED Bulbs

note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Features: 
Sealed by high quality waterproof gel, this strong waterproof function allows you to driving worry-free in rainy or snow days.
License plate led lights can be used as license plate light, courtesy light, dome/roof light, trunk/cargo light for truck, SUV, trailers, motorcycle, off-road truck, bus, boat and other different kind of vehicles.
Lamp beads and smart IC driver insure bright light, low consumption, constant current and long lifespan. High temperature resistant PC lens, Anti-vibration ABS shell, high strength and good toughness.
Easy to install, Use the enclosed mounting screws to install the lights. Convenient and firm.
Low power consumption, high efficiency and energy saving. Direct installation, no wiring or modification, just plug and play.

Specification:
Current: 0.3A
Voltage: 12V
Color temperature: 6000
Power: 3w
Chip: Epistar 3528
Material:ABS
Color:Blue/Green/Red
Size:Approx.7.5x2.7cm/2.95x1.06inches
Compatible with
VW-Golf4/5/6/7
Lupo
Scirocco
Polo- 9N/6R
Passat- B6 3c Limousine
Passat- CC

Package Includes: 2x LED License Plate Light

note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.

【High Brightness】Bright LEDs consume far less power than a standard bulb while maintaining optimal light output. DC 10-15V.
【Durable】 Fully sealed design, not afraid of wind and rain. The car flash strobe light can work under rainy days, foggy days or heavy snow weather, effectively resisting the intrusion and corrosion of sand, dust, dirt, water, snow and other horrible weather.
【Keep Safety】 These reversing lamps improve safety while driving allows your vehicle to be seen quicker when you brake.

【Widely Used】 Perfect for add-on decoration and usage as 3rd brake light, tail brake stop light, under bumper / kit tail brake light. Application span: tail lights, warning lights, brake light, flash light, rear lamp, taillight, strobe light.
【Easy to install】 Easy installation, our stop light can be in used in most vehicle, Universal fit on any Cars, Trucks, SUVs, Trailers, RVs.

Package Includes: 1x Pilot Lights

• 🔥2021 BUY 1 Discount 50%OFF🔥
• 🔥BUY 2 SAVE $8 AND FREE SHIPPING🔥
• 100% Money Back Guarantee.
• Secure Payments ViaPayPal® and CreditCard. 
• SSL Certificates For 100% Security.

Anti-collision laser fog LED Light ,Awesome Halloween Lights!

Specification：

• Product life: 10000 hours
• Material: Aviation Aluminum
• Working voltage: 8V-36V (12-24V universal
• Power: 3W
• Waterproof rating: IPX4
• Suitable models: cars, trucks, motorcycles
• Installation position: in the middle of the rear license plate light
• Installation wiring: can be connected to license plate lights, rear fog lights, brake lights, hazard warning lights.

✌why choose us？

1.using American Kerui lamp beads (3W)，quartz glass lenses.
2.Accurate irradiation angle
3.waterproof：After 48 hours of soaking, it is still clear

How to install：

1. Remove the buckle of the interior trim panel of the trunk, and remove the interior trim panel.
2. Take out the logo host, and stick 3M glue on the bottom of the host (it is recommended to burn the 3M glue with a lighter to make it more firm)
3. Fixed in the middle of the license plate light
4. Hide the cable in the tail box
5. Find the installed circuit, which can be connected to the rear fog lamp, license plate lamp, hazard warning lamp
6. The logo lamp connection line has no positive and negative poles. After finding the connection line, install it directly and wrap it with tape.
7. The small holes at both ends of the host can adjust the logo irradiation direction
8. Installation is complete

size：
Packing box size: 10*7*4CM

package include：

1xLogo light host
1x3M glue sticker
1x Angle adjustment bracket